Computer Input

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select yes. All adjustments will return to their previous figures.

Store

To store the adjusted data, select Store and press the Point U or the SELECT button. Use the Point PQ buttons to select one from Image 1 to 10 and press the SELECT button.

A confirmation box appears and then select yes. Stored data can be called up by selecting an Image (1–10)in the Image Mode Selection on page 40.

Store

A confirmation box appears and then select yes.

Screen Size Adjustment

Select the desired screen size that conforms to the input signal source.

1

Press the MENU button to display the On-Screen Menu. Use

 

the Point PQ buttons to select Screen and then press the

Point U or the SELECT button.

Use the Point PQ buttons select the desired item and then press the SELECT button.

Normal

Provide the image at the normal computer aspect ratio of 4:3.

True

Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point PQT U buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.

Wide

Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used to provide the squeezed video signal at 16:9.

SCREEN MENU

PNote:

•The projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is higher than 1920 x 1200, lower the resolution before connecting the projector.

•The image data other than XGA (1024 x 768) is modified to fit the screen size in initial mode.

•True, Full and Digital zoom +/– cannot be selected when no signal is detected in the PC System Menu. (p.36)

4