Sanyo PLC-XM80L Appendix, Indicators, Indicators and Projector Condition, The projector is operating normally

Appendix

Indicators and Projector Condition

Check the indicators for the projector condition.

The projector is operating normally .

		Indicators
POWER	LAMP	WARNING WARNING P-MANAGEMENT			LAMP	Projector Condition
		TEMP.	FILTER	STAND-BY	REPLACE
green	red
		red	orange	blue	orange
						The projector is off. (The AC power cord is unplugged.)
	❖		⁄		⁄	The projector is in stand-by mode. Press the ON/
						STAND-BY button to turn on the projector.
	❖		⁄		⁄	The projector is operating normally.

The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be

❖⁄ ⁄ turned on until cooling is completed and the POWER indicator lights green.

❖	⁄		⁄	The projection lamp is being cooled down in the Power
				management mode.
				The projector is in the Power management mode.
❖	⁄	❊	⁄	Press the ON/STAND-BY button to turn on the
				projector.

• • • on

❖• • • on (red)

❊• • • on (blue) • • • dim

❖• • • dim (red)

• • • blinking at the normal rate (approx. 1 second ON,

1 second OFF)

❊• • • blinking at the normal rate (blue and dim red) (approx. 1 second ON, 1 second OFF)

• • • off

⁄• • • Differ according to conditions.

• • •blinking fast

(approx. 0.5 seconds ON, 0.5 seconds OFF)

❊• • •blinking fast (blue and dim red) (approx. 0.5 seconds ON, 0.5 seconds OFF)

• • • blinking slow

(approx. 2 seconds ON, 2 seconds OFF)

76