Sanyo PLC-XM80L Input Selection, Remote Control, Direct Operation, Remote Control Operation, Side Control/Remote Control Operation

Input Selection

Direct OperationSide Control/Remote Control Operation

Side Control Remote Control

INPUT button*

INPUT button*

*Only the Input button function is set Mode 1 in the Setting menu, the INPUT button is used for switching input source. (p.51)

The input source changes each time you press the INPUT button on the side control or the remote control as follows: Input 1 ® Input 2 ® Input 3 ® ...

Before using the INPUT button on the side control or the remote control, you must select a correct input source by On- Screen Menu and the latest input source will be displayed.

Remote Control Operation

Press the INPUT 1, INPUT 2, or INPUT 3 button on the remote control. The input source appears on the screen as you press each button. Select the connected input source.

	INPUT 1 button		INPUT  button
		Input 1	Input 
RGB (PC analog)			Video
		RGB (Scart)	y,Pb/Cb,Pr/Cr
RGB (PC digital)			RGB
RGB (AV HDCP)
		INPUT  button
		Input 
		Video
		y,Pb/Cb,Pr/Cr
		S-video

Remote Control

INPUT 1// buttons