Basic Operation

Operating with Projector Control
Lens Operation

The following lens operation can be made with the Lens button on the side control.

Press the LENS button to enter each lens operation mode. The selected adjustment display appears on the screen.

Zoom " Focus " Lens Shift " • • • • •

Zoom Adjustment

Display Zoom on the screen. Use the Point PQ buttons to zoom in and out the image.

Side Control

LENS button

INFO . button

POINT buttons

Focus Adjustment

Display Focus on the screen. Use the Point PQ buttons to adjust focus of the image.

Lens Shift Adjustment

Display Lens shift on the screen. Use the Point PQT U buttons to position the screen to the desired point without having picture distortion.

The screen can be moved up or down to 50 percent, or sideways up to 10 percent from the central axis of the lens shift.

Press and hold the LENS SHIFT button for more than 5 seconds to return to the central position.

PNote:

•The arrow disappears at the maximum lens shift in each direction.

•The arrow turns red when the lens shift comes to the center position of the screen.

INFO . button

Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector.

Press the INFO. button on the remote control to display the information window on the screen. To hide the information window, press the INFO. button again or press the MENU button. The information window can also be selected from the

menu.

PNote:

•The H-sync freq. and V-sync freq. values described in the figure may be different from the actual values.

•SERIAL NO. is used to service the projector.

 

Ô

 

 

Ô

 

 

Information Menu

7