Setting
Filter counter
This function is used to set a frequency for the filter cartridge replacement.
Use the Point PQ buttons to select Filter counter and then press the Point U or the SELECT button to access the submenu items.
Filter counter...... | Show the total accumulated time of the filter |
| cartridge. |
Timer ................ | To set a timer, when the projector reaches |
| the time, the Filter warning icon (Fig. 1) |
| appears on the screen and the total |
| accumulated time turns red, indicating that |
| the filter cartridge replacement is necessary. |
Filter counter reset...When replacing the Filter cartridge, reset the Filter counter (p.65).
Fig .1 Filter warning icon
Filter warning icon appears on the screen at a set time.
Test pattern
Various test pattern are available for use when setting up the projector.
Factory default
This function returns all setting values except for User logo, PIN code lock, Logo PIN code lock, Lamp counter, and Filter counter to the factory default settings.
Filter counter
Press the SELECT button to select Timer and then use the Point PQ buttons to set the timer. Select from (Off/ 600H/900H/100H/1500H/1800H/000H) depending on the use environment.
PNote:
•Fig.1 appears at turning on and selecting input source.
•Fig.1 will not appear when the Display function is set to Off (p.52), during “Freeze” (p.30) or No show (p 29).
6