Computer Input

Computer System SelectionAutomatic Multi-Scan System

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 79-80)

One of the following messages may appear when:

Auto

The projector cannot recognize the connected signal

 

conforming to the provided PC Systems. Auto is

 

 

displayed on the System Menu box and the Auto PC

 

adjustment function works to display proper images.

 

If the image is not projected properly, a manual

 

adjustment is required (pp.38-39).

-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on pp.70-72.)

Mode 1

The preset system is manually adjusted in the PC

 

adjust Menu. The adjusted data can be stored in Mode

 

 

1-10(pp.38-39).

 

PC Systems provided in this projector is chosen. The

SVGA 1

 

projector chooses a proper system provided in the

 

 

projector and displays it.

*Mode 1 and SVGA 1 are examples.

PC System Menu

The PC System Menu Selected system is displayed.

Selecting Computer System Manually

PC system can also be selected manually.

1

Press the MENU button to display the On-Screen Menu. Use

the Point PQ buttons to select Input and then press the Point

U or the SELECT button.

Customized Mode (1-10)set in PC System Menu the PC adjust Menu (pp.38-39).

Use the Point PQ buttons to select Systerm and then press the Point U or the SELECT button.

Use the Point PQ buttons to select the desired system and then press the SELECT button.

Systems in this dialog box can be selected.

6