Sanyo PLC-XP200L owner manual Connecting to Video Equipment Video, S-Video, Installation

Installation

Connecting to Video Equipment (Video, S-Video)

Cables used for connection (✽ = Cables not supplied with this projector.)

•Video Cable (RCA x 1 or RCA x 3) ✽

•BNC Cable ✽

•S-VIDEO Cable ✽

•Scart-VGA Cable ✽

•DVI-Digital Cable ✽

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

Monitor Out Signal Table

	Input Terminal		Monitor Out		Cable
	D-sub15	RGB (PC analog)		YES
Input 1		RGB (SCART)		NO
	DVI-D	RGB (PC digital)		NO
		RGB (AV HDCP)		NO
		RGB		YES
Input 2	5BNC	Video		YES	Q
		Y, Cb/Cr		YES	Q
	RCA	Y, Cb/Cr		YES	Q
Input 3	S-Video	S-video		NO
	Video	Video		YES	Q
Network				NO

Q

A cable with one end D-sub 15 and the other end (Black box) compatible with each equipment is necessary.

		Component Video	Digital Output	RGB Scart	S-video
Composite Video	Component Video	Output	(HDCP
	Output	(Y, Pb/Cb, Cr/Pr)	Composite Video compatible)	21-pin Output	Output

Refer to the Monitor Out Signal Table (above).

RCA	BNC	DVI-Digital	Scart-VGA	S-video
cable	cable	cable	cable	cable

Video Y - Pb/Cb - Pr/Cr Y - Pb/Cb - Pr/Cr Video DIGITAL IN ANALOG IN MONITOR OUT S-VIDEO

23