Sanyo PLC-XP200L Sound Adjustment, Basic Operation, Volume, Mute, Side Control, Remote Control

Basic Operation

Sound Adjustment

Direct Operation

Volume

Press the VOLUME+/– buttons on the side control or on the remote control to adjust the volume of Audio Output. The volume dialog box appears on the screen for a few seconds.

Mute

Press the MUTE button on the remote control to temporarily turn off the AUDIO OUT. To turn the AUDIO OUT back on, press the MUTE button again or press the VOLUME +/– buttons.

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 7 8 buttons to move the red
	frame pointer to the Sound Menu icon.
2	Use the Point ed buttons to move the red frame
	pointer to the desired item, and then press the SELECT

button.

Volume (Audio output)

Press the Point 8 button to turn up the volume; press the Point 7 button to turn down the volume.

Mute (Audio output)

Press the Point 7 8 buttons to switch the mute function On/Off. When the sound is turned off, “On” is displayed. Press the Point 7 8 buttons again to turn the sound back on.

Input pattern

This projector has two INPUT terminals [AUDIO IN Ι/ AUDIO IN ΙΙ]. Input pattern allows you to set up INPUT 1, INPUT 2, and INPUT 3 to each INPUT for sound function. (pp. 11, 35-37)

Press the SELECT button to display the input pattern dialog box. Use the Point ed buttons to move the pointer (red arrow) to the desired pattern and press the SELECT button to set the input pattern for sound function. Check mark appears next to the selected Input pattern.

Side Control

VOLUME +/– buttons

Remote Control

VOL – button

VOL + button

MUTE button

Volume Dialog Box

Approximate level of the volume.

Press the MUTE button to set the Mute function On or Off. The dialog box disappears after 4 seconds.

Sound Menu

Sound Menu icon

Approximate level of the volume.

Exit the Sound Menu.

Input Pattern Dialog Box

Move the pointer (red arrow) to the

desired pattern and press the SELECT button.

Selected Input Pattern

31