Sanyo PLC-XP200L owner manual Projector Condition, Appendix, Indicators

Appendix

The projector is detecting abnormal condition..

Indicators

Projector Condition

POWER

LAMP/

WARNING

WARNING

LAMP

green

SHUTTER

TEMP.

FILTER

REPLACE

red/blue

red

orange

orange

✽

✽

If the Filter counter reached a time set in the timer setting,

a Filter replacement icon (Fig.2) appears on the screen and

the WARNING FILTER indicator on the top panel lights up.

Replace the filter as soon as possible. If the filter is out of

scroll and the projector reaches a time set in the timer setting,

Fig. 3 appears on the screen and the WARNING FILTER

Fig..2

Filter replacement icon

indicator lights up. Replace the filter cartridge as soon as

possible.

If the filter is clogged and no scroll is left in the filter cartridge,

a Filter cartridge replacement icon (Fig.4) appears on the

Fig..3

screen and the WARNING FILTER indicator lights up. Replace

the filter cartridge as soon as possible.

✔Note:

• Fig.2, Fig.3 and Fig.4 icon will not appear when the Display function

Fig..4

Filter cartridge replacement icon

is set to “Off” (p.52) or during “Freeze” (p.33).

The filter cartridge is not installed in the projector. Check the

filter compartment to see if the filter cartridge is installed in

the projector. When the filter cartridge is installed and the

❖

indicators continue to light and blink, read the column below.

The projector detects an abnormal condition and cannot be

turned on. Unplug the AC power cord and plug it again to turn

on the projector. If the projector is turned off again, unplug the

AC power cord and contact the dealer or the service center.

Do not leave the projector on. It may cause an electric shock

or a fire hazard.

✽

✽

✽

✽

The shutter is out of control.

❊

✽

✽

The shutter is out of control. (The projector is in the cooling

❊

mode.)

✽

✽

The shutter is out of control. (The projector is in the stand-by

❊

mode.) In that case, contact the service station immediately.

77