Sanyo PLC-XP200L owner manual Indicators and Projector Condition, Projector is operating normally

Appendix

Indicators and Projector Condition

Check the indicators for the projector condition.

The projector is operating normally..

	Indicators				Projector Condition
POWER	LAMP/	WARNING WARNING		LAMP
green	SHUTTER	TEMP.	FILTER	REPLACE
	red/blue	red	orange	orange
					The projector is off. (The AC power cord is unplugged.)

	❖	✽	✽	The projector is in stand-by mode. Press the ON/STAND-BY
				button to turn on the projector.
	❖	✽	✽	The projector is operating normally.
				(The shutter is open)
	❊	✽	✽	The projector is operating normally.
				(The shutter is closed)
		✽	✽	The projector is preparing for stand-by or the projection lamp
	❖			is being cooled down. The projector cannot be turned on until
				cooling is completed and the POWER indicator lights green.
	❖	✽	✽	The projection lamp is being cooled down in the Power
				management mode.
	❖	✽	✽	The projector is in the Power management mode.
		✽	✽	The projection lamp is being cooled down in the Shutter
	❊
				management mode.
		✽	✽	The projector is in the Shutter management mode. Press the
	❊
				ON/STAND-BY button to turn on the projector.
	✽		✽	The filter is scrolled using the FILTER button on the remote
				control or the Filter control function in the setting menu.
				When the filter is being scrolled, the Filter replacement icon
				and “Please wait...” message (Fig. 1) appear on the screen for
				about 30 seconds.
Fig..1 Filter replacement icon and “Please wait...”

• • • on

❖• • • on (red)

❊• • • on (blue) • • • dim

❖• • • dim (red)

• • • blinking at the normal rate (approx. 1 second ON,

1 second OFF)

❊• • • blinking at the normal rate (blue and dim red) (approx. 1 second ON, 1 second OFF)

• • • off

✽• • • Differ according to conditions.

• • •blinking fast

(approx. 0.5 seconds ON,

0.5seconds OFF)

❊• • •blinking fast (blue and dim red) (approx. 0.5 seconds ON, 0.5 seconds OFF)

• • • blinking slow (approx. 2 seconds ON, 2 seconds OFF)

75