Video Input, Video System Selection | Sanyo PLC-XP200L manual

Video Input

Video System Selection

1	Press the MENU button to display the On-Screen Menu. Use
1	the Point 7 8 buttons to move the red frame pointer to the
	AV System Menu icon.
2	Use the Point ed buttons to move the red arrow pointer to
2	the desired system and then press the SELECT button.

Video Jack or S-Video Jack

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance.

When Video System is PAL-M or PAL-N, select the system manually.

PAL/SECAM/NTSC/NTSC4..43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV SYSTEM MENU (VIDEO OR S-VIDEO)

AV System Menu icon

The selected system is displayed

Move the pointer to the desired system and press the SELECT button.

Y, Pb/Cb, Pr/Cr Jacks

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

When the Video System is 1035i or 1080i, select the system manually.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.

AV SYSTEM MENU (COMPONENT VIDEO)

AV System Menu icon

The selected system is displayed.

Move the pointer to the desired system and press the SELECT button.

45

Image 45

Sanyo PLC-XP200L owner manual Video Input, Video System Selection, Video Jack or S-Video Jack, Pb/Cb, Pr/Cr Jacks

Contents

Model PLC-XP200L Features and Design Table of Contents Risk of Electric Shock Do not Open To The Owner Safety Instructions Top Panel Air Circulation Positioning Precautions Installing the Projector in Proper Directions Transporting the Projector Moving the Projector AC Power Cord for the United States and Canada AC Power Cord RequirementAC Power Cord for the United Kingdom Compliance Front Part Names and FunctionsBack Bottom Rear Terminal Kensington Security Slot 1MONITOR OUT Terminal Side Control Indicators on the top panel Side Control and Indicators Remote Control 5D..ZOOM button @4P-TIMER button6INPUT 1 3 buttons 7KEYSTONE button Remote Control Battery Installation Remote Control Receivers and Operating RangeWired Remote Control Transmitter Remote Control Code Adjustable Feet Installation Removing the lens Lens Installation Attaching the lens to the projector Focus correction Focus adjustment DVI-Digital Cable USB Cable BNC Cable Connecting to a Computer Digital and Analog RGB Monitor Out Signal Table Connecting to Video Equipment Video, S-Video Audio OUT Connecting for Audio Signal Connecting the AC Power Cord For the U..KFor the U..S..A.. and Canada For Continental Europe Basic Operation What is PIN code?Turning On the Projector Enter a PIN code Turning Off the Projector Remote Control How to Operate the On-Screen MenuSide Control On-Screen Menu Menu Bar For Computer SourceFor Video Source Lens Operation Operating with Projector Control Sound Adjustment Direct OperationMenu Operation Operating with Remote Control Mouse Pointer button Timer buttonPointer button Freeze button Wireless Mouse Operation Pointer FunctionMouse Pointer Remote Control Operation Side Control/Remote control OperationInput Selection Input Computer Input Source Selection Input MenuSource Select Menu Video Pb/Cb, Pr/Cr Video Input Source Selection Computer System Selection Computer InputAutomatic Multi-Scan System Selecting Computer System Manually Auto PC Adjustment PC Adjust MenuAuto PC adj Manual PC Adjustment Mode free ResetTo store the adjusted data Store Standard Image Level SelectionReal Image Screen Menu Screen Size Adjustment Ceiling KeystoneRear Digital zoom + Video System Selection Video InputVideo Jack or S-Video Jack Pb/Cb, Pr/Cr Jacks Cinema Provide the image at the normal video aspect ratio Keystone Image Adjust Menu Image AdjustmentPointer Mode Picture Image Menu Color MColor Palette DEL Offset Red/Green/Blue White balance Red/Green/BlueSharpness Gamma Setting Setting Logo BackgroundLogo select Capture Change the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code Simple mode Remote controlTo change the code for the remote control Simple mode buttons Power management RC sensorOn start PIN code lock Security Key lockSecurity Key lock PIN code lock Change the PIN code lock setting Change the PIN Code Lock settingChange the PIN Code Change the PIN code Protection ShutterManagement Lamp counter Factory default Filter counterTest pattern Filter Instructions Maintenance and Care Turn off the projector, and unplug the AC power cord Scroll counter Filter counter Lamp Replace indicator Lamp ReplacementReset the Lamp counter p.65 Top Panel Order Replacement Lamp Resetting the Lamp Counter Lamp Handling Precautions Cleaning the Projector Cabinet Cleaning the Projection Lens Then check the matters below Troubleshooting Problem SolutionsAppendix Appendix You cannot operate with Menu Tree Information Image AdjustComputer Input/Video Input Sound Computer Input PC AdjustSystem Image Select Screen Setting Projector is operating normally Indicators and Projector Condition Lamp Replace Projector is detecting abnormal condition Appears on the screen and the Warning Filter Resolution Compatible Computer Specifications WXGA+ Technical Specifications To the sales and service engineers Lens ReplacementOptional Parts PJ Link Notice Control Port Connector D-sub 9 pin Configurations of TerminalsInput Output PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Dimensions Serial Control Interface OperationExample Format Functional Execution Command Status Read Command KR7AL