Setting
Filter counter
This function is used to set the timing for the filter cleaning.
When the projector reaches a specified time, the Filter warning icon appears on the screen and the WARNING FILTER indicator blinks orange, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET and set the timer. The WARNING FILTER indicator and Filter warning icon will not be turned off until the filter counter is reset.
If filter clogging is detected during operations, the Filter warning icon appears on the screen and the WARNING FILTER indicator lights orange urging you to clean or replace the filter. The WARNING FILTER indicator and Filter warning icon will not be turned off until the filter is cleaned or replaced by a new one.
For details about setting the timer, refer to “Maintenance and Filter Cleaning” on page 62.
Factory default
This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, and the lamp counter to the factory default settings.
Quit
Exit the Setting Menu.
Filter counter
Use the Point 78 buttons to set the timer. Select from (Off/100H/200H/300H).
Filter warning icon appears on the screen when the filter is due for cleaning or when clogging is detected during operations.
Factory default
Select Factory default and this box appears. Select [Yes], and the next box appears.
Select [Yes] to activate it.
62
