Sanyo PLC-XT25 owner manual 4Infrared Remote Reciever Back, Reset button

Part Names and Functions

Rear Terminal

✽ !4 !3 !2 !1 !0

!0R/C JACK

When using the wired remote control, connect the wired remote control to this jack with a remote control cable (optional).

!1AUDIO MONITOR OUTPUT JACK

This jack outputs the audio signal from computer or video equipment to external audio equipment. (See page

!2MONITOR OUTPUT TERMINAL (ANALOG) This terminal outputs the video signal from computer to external video equipment. (See page

!3CONTROL PORT CONNECTOR

When controlling a computer with the remote control of the projector, connect the mouse port of your computer to this connector. (See page 13.)

!4Infrared Remote Reciever (Back)

The infrared remote reciever is also located in the front. (See page .)

✽RESET button

A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.

12