Sanyo PLC-XT25 owner manual Manual PC Adjustment

Computer Adjustment

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 78 buttons to move the red
	framed pointer to the PC Adjust Menu icon.
2	Use the Point ed buttons to move the red framed
	pointer to the desired item and then press the SELECT

button to display the adjustment dialog box. Press the Point 78 buttons to adjust the setting value.

Fine sync

Eliminate flicker from the image displayed. Press the Point 78 buttons to adjust the value. (From 0 to 31)

Total dots

Adjust the number of total dots in one horizontal period. Press the Point 7 8 buttons to adjust number to match your PC image.

Horizontal

Press the Point 7 8 buttons to adjust the horizontal picture position.

Vertical

Press the Point 7 8 buttons to adjust the vertical picture position.

Current mode

Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer.

Clamp

Adjust clamp level. When the image has dark bars, try this adjustment.

PC Adjust Menu

PC Adjust Menu icon

Move the red framed pointer to the desired item and press the SELECT button.

Status (Stored/Free) of the selected Mode.

Selected Mode

Press the Point 78 buttons to adjust the value.

Press the SELECT button here to adjust other items.

Press the SELECT button at Current mode to show the information of the connected computer.

40