Sanyo PLV-HD2000N, PLV-HD2000E owner manual When Select Input 2 5 BNC Terminal

BASIC OPERATION

WHEN SELECT INPUT 2 (5 BNC TERMINAL) INPUT MENU

Move a pointer to source that you want to select and press SELECT button.

RGB

When connect a computer output [5 BNC Type (Red, Green, Blue,

Horiz. Sync and Vert. Sync.)] from a computer to R/Pr, G/Y, B/Pb,

H/HV and V jacks.

INPUT Menu icon

Move arrow to INPUT source that you want to select, and then press SELECT button.

YCbCr

When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from	Input 2	Input 3
video equipment to R/Pr, G/Y and B/Pb jacks.

WHEN SELECT INPUT 3 (DVI TERMINAL)

Move a pointer to source that you want to select and press SELECT button.

RGB(Analog)

When your computer is connected to INPUT 3 (ANALOG) terminal, select RGB(Analog).

RGB(Scart)

When video equipment is connected to INPUT 3 (ANALOG) terminal, select RGB(Scart).

RGB(PC digital)

When your computer is connected to INPUT 3 (DIGITAL) terminal, select RGB(PC digital).

RGB(AV HDCP)

If a HDCP-compatible signal source is connected to the INPUT 3 (DIGITAL) terminal, select RGB(AV HDCP).

NOTE;

HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content which is delivered by DVI (Digital Visual Interface) from being copied.

The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

26