LENS REPLACEMENT AND INSTALLATION PROCEDURE
NOTE : The installation procedure and needed parts for lens installation depend on the type of the Projection Lens. Check the Model No. of the Projection Lens and be sure to install or replace the lens following procedure below.
1 | Remove Lens Cover. Remove 2 Screws A. Push |
part B and pull Upper Lens Cover up. |
(See Fig. 1.)
UPPER LENS
COVER
B
2 | Remove 4 Screws C. Pull Lower Lens Cover |
toward front and remove. (See Fig. 2.) |
LOWER LENS
COVER
A
C
C
D
Fig-1
Fig-2
3 | Remove 2 Screws D and Cover Plate on the |
back of Upper Lens Cover. (See Fig. 3.) |
UPPER LENS
COVER
COVER PLATE
Fig-3
- 2 -
