Basic Operation

Turning On the Projector

1

Complete peripheral connections (with a computer, VCR,

 

etc.) before turning on the projector.

2

Connect the projector’s AC power cord into an AC outlet and

 

turn the Main On/Off switch on. The POWER indicator lights

 

red.

3

Press the POWER ON-OFF button on the top control or on

 

the remote control. The POWER indicator turns green and

 

the cooling fans start to operate. The automatic slide shutter

 

opens, and then a preparation display appears on the screen

 

and the countdown will start.

4

After the countdown, the input source that was selected the

 

last time will appear on the screen.

✔Note:

•If the automatic slide shutter is half-open, projector will not be turned on and the POWER indicator will blink orange. In this case, press the POWER ON-OFF button again.

•When “Countdown off” or “Off” is selected in the Display function, the countdown will not be shown on the screen (p.36).

•During the countdown period, all operations are invalid.

POWER indicator

POWER

ON-OFF

 

 

button

NO FREEZE

SHOW

Top Control

Remote Control

Main On/Off switch

OFFON

Selected Input Source

Automatic Slide Shutter

Use this tab when handling manually.

Do not touch the slide shutter while it is moving, as this could cause injury or the projector to malfunction.

18