Image Adjustment

White balance (Red)

Press the Point 7 button to lighten red tone; press the Point 8 button to deepen red tone. (From -31 to +31.)

White balance (Green)

Press the Point 7 button to lighten green tone; press the Point 8 button to deepen green tone. (From -31 to +31.)

White balance (Blue)

Press the Point 7 button to lighten blue tone; press the Point 8 button to deepen blue tone. (From -31 to +31.)

Sharpness

Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image. (From -7 to +7.)

Lamp control

This function allows you to change the brightness of the screen. Use the Point 7 8 buttons to select the desired lamp mode. You can also select the lamp mode by pressing the LAMP CONTROL button on the remote control.

Normal . . . . . Normal brightness.

Auto 1 . . . . . The brightness according to the input signal.

Auto 2 . . . . . Less bright and lower-sound than Auto 1.

Eco . . . . . . . Lower brightness reduces the lamp lower consumption.

The lamp mode is automatically switched to the Eco mode under no signal input.

Gamma

Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast. (From -7 to +7.)

Progressive

An interlaced video signal can be displayed in progressive. Use the Point 78 buttons to select the desired mode.

Off . . . . . Disabled.

L1 . . . . . Select “L1” for moving pictures.

L2 . . . . . Select “L2” for still pictures.

Film . . . . Select “Film” for watching a film. With this function, the projector reproduce pictures faithful to the original film quality; it operates on 3-2 and 2-2 pulldown video sources.

Lens iris

Use the Point 78 buttons to adjust the lens iris. It can be stopped down from zero. (From 0 to -63.)

✔Note:

•If any of the White balance (Red, Green or Blue) is adjusted, the Color temp. level will change to “User”.

•Progressive cannot be selected with the computer input and when the video signal format is 480p, 575p, or 720p.

•The Film mode in the Progressive function cannot be selected when the video signal format is 1080i. If you select the Film mode when the video signal format is 480i and then input 1080i signal, it will switch to the L1 mode.

Press the Point 8 or OK buttons to display the Advanced menu.

Press the Point d button to move on to the next items.

Go on to the next page...

29