Picture Adjustment

Picture Position and Screen Adjustment

Some input source employ special signal formats which may not be tuned by the auto-tuning system of this projector. Picture Adjustment enables you to precisely adjust several parameters manually to match those signal formats. The parameters manually adjusted will be stored for every input.

1

Select the Picture adj. Menu with the Point ed buttons and

Picture adj. Menu

 

press the Point 8 or OK buttons to access the sub-menu

 

 

items.

 

2

Use the Point ed buttons to select the desired item and

 

 

press the Point 8 or OK buttons to access the selected item.

 

 

The adjustment bar will be displayed.

 

3

Use the Point 7 8 buttons to adjust the setting values and

 

 

press the OK button.

 

Overscan

Use the Point 7 8 buttons to adjust the overscan area. It works only to decrease the overscanned portion of the screen.

(From 0 to +10.)

Horizontal

Use the Point 78 buttons to adjust the horizontal picture position. (From -100 to +100.)

Vertical

Use the Point 7 8 buttons to adjust the vertical picture position. (From -100 to +100.)

Auto adj.

When the input signal is from a computer, select Auto adj. Press the Point 8 or OK buttons and it automatically adjust Fine sync. Total dots, Horizontal and Vertical positions to conform to your computer.

Fine sync

Eliminate a flicker from the image displayed. Use the Point 7 8 buttons to adjust the value. (From 0 to +31.)

Total dots

The selected item.

Press the Point 8 or OK buttons to access the selected item. The adjustment bar will be displayed.

Use the Point 7 8 buttons to adjust the the setting values and press the OK button to return to the sub- menu.

Adjusts the number of total dots in one horizontal period. Use the Point 7 8 buttons to adjust the number to match your PC image. (From -100 to +100.)

✔Note:

•Overscan can be selected with the video input only.

•The adjusting range for the Horizontal and Vertical positions and Total dots differs depending on the input signal. When the video signal format is 480i or 575i, the adjusting range for the Horizontal position will be from -8 to +8.

•The Auto adj. function cannot be operated with the video input, some incompatible computer input and digital signals.

•Fine sync and Total dots cannot be operated when the video signal format is 480i or 575i and with some incompatible computer input and digital signals.

•The Picture adj. Menu cannot be operated without an input signal.

If you press the Point d button, the next item can be selected.

32