Image Adjustment

Advanced menu

This function can be selected only when Advanced menu in the Setting Menu (p.35) is “On”. You can adjust the following items through this function.

Lamp iris . . . . . . . . . . . . . Select Auto, Open or Close for the Lamp iris.

Auto black stretch . . . . . Enhance the black color in a bright image. Select Off/ L1/L2/L3.

Contrast enhancement . . Adjust the contrast of color in a bright image. Select Off/ L1/L2/L3.

Transient improvement . . . . Adjust the sharpness of picture outline. Select Off/ L1/L2/L3.

Color management . . . . . Adjust color level, color phase and gamma of the selected spot of a projected image. Exchange the original color with the adjusted one. The projector can store up to eight (8) color management data. For details, see “COLOR MANAGEMENT” below.

Gain R/G/B . . . . . . . . . . . Adjust red, green and blue to get the desired contrast of color.

(From -15 to +15.)

Offset R/G/B . . . . . . . . . . Adjust red, green and blue to get the desired brightness of color.

(From -15 to +15.)

Gamma R/G/B . . . . . . . . Adjust red, green and blue to get the desired neutral color.

(From -5 to +5.)

COLOR MANAGEMENT

COLOR MANAGEMENT LIST

Select Color management in the Advanced menu and then press the OK or Point 8 buttons. The COLOR MANAGEMENT LIST will appear. You can store up to eight

(8) color management data in the list.

Press the OK button when selecting the following items.

ALL DEL . . . . . Delete all the data in the list.

Press the OK button and the confirmation box will appear. Select [Yes] and press the OK or Point 8 buttons.

COLOR M. . . . Go to COLOR SELECTION on the next page.

EXIT . . . . . . . . Exit the Color management mode and return to the Advanced menu. To store the adjusted data, see “Store” in the next page.

Press the MENU button when you want to return to the Advanced menu.

Press the Point 8 or OK buttons to access the selected item. The adjustment bar will be displayed.

Use the Point 7 8 buttons to adjust the setting values and press the OK button.

If you press the Point d button, the next item can be selected.

COLOR MANAGEMENT LIST

Clear the check mark if you

Select the DEL box if

do not want to apply this

you want to delete the

adjusted color data to a

adjusted data. The

projected image.

confirmation box will

 

appear.

 

 

 

 

 

 

 

 

Select [Yes] to delete the adjusted color data.

30