• • • • •

Image Adjustment

Image Level Adjustment

Image level can be adjusted for each input source and the adjustment is kept until the projector is turned off.

Direct Operation

Press the IMAGE ADJ. button on the remote control to display the Image adj. Menu items one at a time and directly adjust the selected item.

Remote Control

MENURESET

OK

Use the Point ed buttons to select the desired item and the Point 7 8 buttons to adjust the settings. Press the MENU button after adjusting.

If you press the OK button after adjusting each item, it enters the On-Screen Menu.

Menu Operation

1

Select the Image adj. Menu with the Point ed buttons and

 

press the Point 8 or OK buttons to access the sub-menu

 

items.

2

Use the Point ed buttons to select the desired item and

 

press the Point 8 or OK buttons to access the selected item.

 

The adjustment bar will be displayed.

3

Use the Point 7 8 buttons to adjust the setting values and

 

press the OK button.

Brightness

Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness. (From -31 to +31.)

Contrast

Press the Point 7 button to decrease the contrast; press the Point

8button to increase the contrast. (From -31 to +31.)

Color

Press the Point 7 button to decrease the intensity of the color; press the Point 8 button to increase the intensity of the color. (From -31 to +31.)

Tint

Use the Point 7 8 buttons to adjust the tint value to obtain a proper color balance. (From -31 to +31.)

Color temp.

Use the Point 78 buttons to select the desired Color temp. level. (High, Mid, Low1, Low2, or Low3.)

✔Note:

•Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N except for 575i.

•The Image adj. Menu cannot be operated without an input signal.

SCREEN

IMAGE

IMAGE ADJ. button

 

IMAGE ADJ.

 

BRIGHTNESS

CONTRAST

 

BRIGHT

CONT. COLOR

 

Brightness ➜ Contrast ➜ Color ➜ Tint ➜ Color temp. ➜ Red ➜ Green ➜ Blue ➜ Sharpness ➜ Lamp control ➜ Gamma ➜ Progressive ➜ Lens iris ➜ Lamp iris ➜ Auto black stretch➜ Contrast enhancement ➜ Transient improvement ➜ Gain R/G/B ➜ Offset R/G/B ➜ Gamma R/G/B ➜

Image adj. Menu

The selected item.

Press the Point 8 or OK buttons to access the selected item. The adjustment bar will be displayed.

Use the Point 7 8 buttons to adjust the setting values and press the OK button.

If you press the Point d button, the next item can be selected.

Go on to the next page...

28