When selecting Video or S-video, press the Point 8 button to display the System Menu.
Use the Point ed buttons to select the desired system and press the OK or Point 8 buttons.
When selecting Computer, press the Point 8 button to display the Source Select Menu.
Select the Input Menu with the Point ed buttons and press the Point 8 or OK buttons to access the sub-menu items.

Input

Menu Operation

1

2 Use the the Point ed buttons to select an input source and press the OK or Point 8 buttons. The selected item will be check marked.

3

4

5

6 Use the Point ed buttons to select the desired source and press the OK or Point 8 buttons.

Video or S-Video

When the video input signal is connected to the VIDEO or S- VIDEO jacks, select Video or S-video respectively.

Auto

The projector automatically detects the incoming video system and adjusts itself to optimize its performance.

When the video system is PAL-M or PAL-N, select the system manually.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If the projector cannot reproduce a proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

Component 1 or 2

When the video input signal is connected to the Y-Pb/Cb-Pr/Cr jacks, select Component 1 or 2.

The projector automatically detects the incoming video signal and adjusts itself to optimize its performance.

Input Menu

The currently set item is check marked.

Press the Point 8 button

Video

Input to display the System

Menu.

System Menu (Video/S-Video)

Use the Point ed buttons to select the desired system and press the OK or Point 8 buttons.

Quit

Exit this menu.

25