Image Adjustment

COLOR SELECTION

Press the OK button when selecting COLOR M. in the Color management list. The Color management list disappears and the Color management pointer will appear.

Use the Point ed78 buttons to move the pointer to a spot where you want to adjust the color and then press the OK button. The image being projected freezes and the COLOR SELECTION window will appear. (Certain colors may not be adjusted and in such cases, an exclamation mark will be displayed.)

Select COLOR LEVEL, COLOR PHASE or GAMMA with the Point ed buttons and use the Point 7 8 buttons to adjust them. While adjusting, the changes are reflected in the projected image accordingly. If you press the MENU button while operating the color selection, the Color management pointer will be reset. After adjusting, press the OK button to go to the Color management list.

COLOR MANAGEMENT LIST (continued)

In the COLOR MANAGEMENT LIST, the adjusted color data are check marked reflecting the changes in the projected image. (See the previous page.)

You can also decide whether or not to apply the adjusted color data in the list to a projected image. Clear the check mark if you do not want to apply the adjusted color data; select the check mark and then press the OK button. The check mark will disappear.

If you want to readjust the color, select a color data box in the list and press the OK button. The COLOR SELECTION window will appear and you can readjust the color. See above for color selection.

If you want to delete a particular color data in the list, select the DEL box of the color data and then press the OK button. The confirmation box will appear. Select [Yes] and then press the OK or Point 8 buttons.

Reset

To reset the adjusted data, select Reset and press the Point 8 or OK buttons. The confirmation box will appear. Select [Yes] and then press the OK or Point 8 buttons. All adjustments return to their previous figures. You can also reset the adjusted data with the RESET button on the remote control.

Store

To store the adjusted data, select Store and press the Point 8 or OK buttons. The Image Level Menu will appear. Choose one of the four (4) image levels with the Point ed buttons and press the OK or Point 8 buttons. The confirmation box will appear. Select [Yes] and then press the OK or Point 8 buttons. To exit the Image Level Menu, press the OK or Point 8 buttons at the Quit icon.

The stored data can be called up by selecting “User image 1 ~ 4” in the Image Level Selection on page 27.

✔Note:

•If you turn off the POWER without storing adjusted settings, all the adjusted settings will be reset.

•When resetting, the adjusted data in Advanced menu will be reset whether or not Advanced menu in the Setting Menu is “On”. See on page 35.

COLOR SELECTION

Color management pointer

Use the Point ed78 buttons to move the pointer to a spot where you want to adjust the color and then press the OK button. The COLOR SELECTION window will appear.

After adjusting Color level, Color phase and Gamma, press the OK button.

Go to the Color management list (see the previous page).

To store the adjusted data, exit the Color management mode and move on to “Store” in the Image adj. Menu.

Press the Point 8 or OK buttons at this icon to store the adjusted data. The Image Level Menu will appear.

Choose one of the four (4) image levels with the Point ed buttons and press the OK or Point 8 buttons. The confirmation box will appear. Select [Yes] and then press the OK or Point 8 buttons.

Quit

Press the OK or Point 8 buttons at this icon to close the dialog box.

31