Input

HDMI

When the video input signal is connected to the HDMI terminal, select HDMI.

The projector automatically detects the incoming video signal and adjusts itself to optimize its performance.

If the output signal of video equipment and the input signal of the projector do not match, you might not get an image with the best quality.

If the black part of the picture appears unclear (too dark or too light), try the input signal with “HDMI setup” in the Setting Menu on page 36.

Computer

When the input signal is connected to the COMPUTER connector, select Computer.

RGB (Analog)

When the input source is analog coming from a

 

computer connected to the COMPUTER

 

 

connector, select RGB (Analog).

 

When the input terminal is Scart with a DVD

RGB (Scart)

 

player connected to the COMPUTER connector,

 

 

select RGB (Scart).

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan system and the Auto adj. function (p.32). If Computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional setting. (The signal formats provided in this projector is shown on page 52.)

Press the Point 8 button

Computer

Input to display the Source

Select Menu.

Source Select Menu

Use the Point ed buttons to select the desired source and press the OK or Point 8 buttons.

Quit

Exit this menu.

26