Appendix
Indicators and Projector Condition
Check the indicators for projector’s condition.
Indicators
POWER | WARNING | LAMP | Projector Condition |
red/green/ | REPLACE |
| |
orange | red | yellow |
|
|
|
|
|
|
|
| The Main On/Off switch is off or the AC power cord is unplugged. |
|
|
|
|
|
| ✽ | The projection lamp is being cooled down. The projector cannot be turned on |
|
| until cooling is completed. | |
|
|
| |
|
|
|
|
|
| ✽ | The projector is ready to be turned on with the POWER |
|
|
|
|
|
| ✽ | The projector is operating normally. |
|
|
|
|
|
| ✽ | The projector is in the Power management mode. |
|
|
|
|
|
|
| The temperature inside the projector is abnormally high. The projector |
|
|
| cannot be turned on. When the projector is cooled down enough and the |
|
| ✽ | temperature returns to normal, the POWER indicator emits a red light and |
|
|
| the projector can be turned on. (The WARNING indicator keeps blinking.) |
|
|
| Check and clean the air filters. |
|
|
|
|
|
|
| The projector has been cooled down enough and the inside temperature |
|
| ✽ | returns to normal. When turning on the projector, the WARNING indicator |
|
|
| stops blinking. Check and clean the air filters. |
|
|
|
|
|
|
| The projector detects an abnormal condition and cannot be turned on. |
|
|
| Unplug the AC power cord and plug it again to turn on the projector. If the |
|
| ✽ | projector is turned off again, unplug the AC power cord and contact the |
|
|
| dealer or service center for servicing and checkup. Do not leave the |
|
|
| projector on. It may cause an electric shock or a fire hazard. |
|
|
|
|
|
|
| The lamp does not turn on because malfunction occurs or the lamp life |
|
|
| comes to an end. |
|
|
|
|
|
| ✽ | The automatic slide shutter is not working properly. |
|
|
|
|
• • • green | • • • blinking green | • • • blinking orange | • • • off |
• • • red | • • • blinking red | • • • blinking yellow |
|
*When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator becomes yellow, replace the projection lamp with a new one promptly. Reset the Lamp replacement counter after replacing the lamp. The time when the LAMP REPLACE indicator should light is depending on the lamp mode. See pages 46 and 47.
49