Chapter 4 Controlling the Projector
Control the projector
The control menus are displayed on the upper side of the page. When you click each control icon, the control page is displayed according to the control menu you select- ed. The setting method differs depending on the contents of the page. Click on the page number linked texts to change pages and select desired setting items.
✐Please see the owner's manual of the projector to have the further information of each control item.
✐If the adjustment items are not required by the projector itself or input signal, the mark of
✐The control page displays valid control items depending on the selected input mode, signal or functions of the projector you use, therefore, there may be different controls between the described items and actual control items on the page display.
✐When the projector is in standby, only the timer on the setting menu is effective; others are inactive.
Input
This function is to select the input mode and slot to the projector. Select the input slot with the radio button, and input source mode with the pull- down menu button. Then set the selected input source and source mode
by pressing the Set button.
Select a slot with |
| Select a source |
radio buttons. |
| mode with |
|
| menu. |
|
|
|
Mounted Board name
Item Description
Input(SLOT) ......Displays input number and
board name installed in the pro- jector. The setting items differ from the actual depending on the board function.
*Available slots and indications may differ from the actual depending on the projector's model type.
38
