Chapter 5 Controlling the Multi-Projectors

Control multi-projectors at the same time

The valid controls are shown below. Please refer to chapter 4 “Controlling the Projector” (p.35) for further control and description. When the control button or setting button is pressed, the registered projectors for the multi-control are controlled at the same time. * These control items differ from each selected input mode and functions of the projector you use. Change of function is disable if the multi-controlled projector does not support its function.

* The above pages are example. They may differ from the actual depending on the projector's model type.

60

Page 60
Image 60
Sanyo POA-MD13NET2 owner manual Control multi-projectors at the same time