Sanyo POA-MD13NET2 owner manual Serial Port Setting

Serial Port Setting

Setting to control the equipment connected to the serial port from the computer

Serial Control :Selects “External”

Port:Sets according to the com- puter specified port no. Do not use port no. 10000*2.

Other Settings :Sets according to the com- munication condition of the equipment

Setting to control the projector from the serial controller connected to the serial port

Serial Control :Selects “Projector”

Port:Not specified. Do not use port no. 10000*2.

Other Settings :Sets according to the com- munication condition of the serial controller

Setting to control the projector from the computer through the LAN port

Serial Control	:Not specified
Port	:Not specified
Other Settings	:Not specified

* The port no. of the computer must be used with 10000.

*1 This product will restart automatically when “Port” or “Serial Control” is changed and it takes about 40 seconds.

*2 The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is reserved to control the projector through the LAN port.

✐There are 2 types of RS-232C serial cable, Normal(Straight) and Reverse(Cross) type. This product provides with a serial port switching socket. Set this switch to proper side according to the cable type. How to switch the serial port socket, see item "Serial Port Switching".(☞ p.61)

✐Exclusive driver software for control of the external equipment is required. This product does not provide any driver software. Please consult your local dealer.

Network Board

OWNER’S MANUAL

ENGLISH

63