Chapter 4 Controlling the Projector
Service
This function sets parameters for service items of the projector. As these service items are used mainly for maintenance, please use the default set- ting unless a change is needed. There may be not available items depend-
ing on the projector's function.
Item | Description |
Fan Control |
|
Speed | Sets fan control speed. |
Prohibition | Sets the prohibition of the pro- |
| jector control by the remote |
| control or the keys on the pro- |
| jector. |
Item | Description |
Video System*1 | ..Displays the current video sys- |
| tem mode. |
H Area*1 | Adjusts the horizontal effective |
| area. |
V Area*1 | Adjusts the vertical effective area. |
H Position*1 | Moves image horizontally |
V Position*1 | Moves image vertically. |
*1 It cannot be displayed in the computer mode. * To restore the setting, press the Default button. * Some projector's model types cannot support
this function.
- The indication of video system in this page is displayed as follows.
Video System | Input Signal |
480I | NTSC [VIDEO], |
480P | NTSC [Y, Cb/Pb, Cr/Pr] |
575I | PAL [VIDEO], |
575P | PAL [Y, Cb/Pb, Cr/Pr] |
720P60 | [Y, Pb, Pr] |
720P50 | [Y, Pb, Pr] |
1035I | [Y, Pb, Pr] |
1080I60 | [Y, Pb, Pr] |
1080I50 | [Y, Pb, Pr] |
1080P60 | [Y, Pb, Pr] |
1080P50 | [Y, Pb, Pr] |
|
|
✐The adjustments of H/V Area and Position are effective only for video input mode. These adjustment values are stored with each video system mode as the above.
50
