Chapter 4 Controlling the Projector

(Set JavaScript On)

* In case of 2 lamps model

Item

Description

Lamp Interval ....Sets the interval period of

 

switching two lamps.

Remote Control

......Sets the remote control codes.

Lamp Counter

Reset ................Resets the lamp use-time.

Reset when replaced lamp. P-TIMER ............Used to display the timer on

the screen. The status is changed as ON -> STOP -> OFF when this button is pressed repeatedly.

Factory Default ..Restore the value of the setting items to the factory default value.

*There may not be available depending on the projector's model type.

About Lamp Counter reset

The confirmation window as the left will appear when the Reset button of the “Lamp Counter Reset” is pressed. Select which lamp counter is to be reset with the radio button and then press the OK button.

*There may fail to be reset depending on the projector’s type.

(Set JavaScript Off)

Item Description

Actual Time........Displays the current time set to

the projector.

Timer Setting ....Function to switch on or off the

projector at the programmed date and time. Please see chapter “How to set the Timer” for further instructions.

* Please see the pages 48 - 49 for details.

There are various kind of ways to change the JavaScript preference depending on the web browser's version and application. Please refer to chapter “Appendix: Web browser setting/Active Script (JavaScript enable)” (p.72).

46

Page 46
Image 46
Sanyo POA-MD13NET2 owner manual About Lamp Counter reset, Switching two lamps