Sanyo POA-MD13NET2 owner manual Save a Set, Load a Set

Chapter 4 Controlling the Projector

Save a Set

1 Decide your desired PC adjustment val- ues through the PC Adjustment pages “1”to “2”.

2 Display the page “3” and select a mode number*1 with the pull-down menu but- ton of the Save to. Type a memo into the Memo text area for simple description of your selected number.

3 Register by pressing the Set button. To restore the adjustments, press the Reset button.

It is displayed with “Stored” or “Free” for the memo of Mode1 to Mode5. The memo of ExMode6 to ExMode50 can be stored into the selected mode.

Select a mode by clicking the button

Type a memo for the selected mode

Load a Set

Select a set to load with the pull-down menu button of the Load Setting No. and press the Set button. The stored setting values will be applied to the each PC adjustment item.

Select a load mode by clocking the but- ton

*1 Available mode may differ from the actual depending on the projector's model type. Type1: Mode1 to Mode5, ExMode6 to ExMode50

Type2: Mode1 to Mode10, ExMode11 to ExMode50

✐The Display settings can be stored up to 50 sets, Mode1 to Mode5(Mode10) are stored into the projector and ExMode6(ExMode11) to ExMode50 are stored into the Network Board.

40