Control the Projector
Save Actual Adjustment
This function is to save and load the control values of the projector. The storable control items are Input, PC, System, Image and Screen controls.
1 Adjust and set the controls
Set the controls properly according to the selected source. (see pages
2 Select the Save page
Click on the Save icon from the control menu. The setting page is displayed as the right. Change pages by clicking on the page numbers “1” to “7” linked text and check the current settings. For further information please see the next page.
3 Name the current setting
Select a set number
Type a memo for the selected set number
Select a set number (Set1 to set10) you intend to store current settings with the
4 Save the current setting
Press the Set button to store the current setting and name into the selected set number.
✐You can store up to 10 sets of controls into the Network Board.
Check the Save items
Browse pages by clicking on the page numbers and check each setting status. The pages for the save items are constructed by 7 pages. The contents of the pages may differ from the actual depending on the selected input mode and the function of the projector.
Network Board
OWNER’S MANUAL
ENGLISH
51
