For the Projector which provides the Network main menu
Network configuration
How to enter the numbers with the screen 10-key pallet
1.Select a column with a red frame by using the point buttons 78 .
2.Press SELECT button. The screen
3.By using the point buttons(d e 7 8), select numbers 0 to 9 and press SELECT button. By repeating the above to enter the complete number on the column.
*To change the number in a column, select “C” and press SELECT button to clear the num- ber in the column and then enter the number again.
4.After entering the number in the column, select a move key (7 8ed) located on the lower part of the pallet by using the point buttons and press SELECT button repeatedly to move the red frame.
5.Repeat steps 3 to 4 for entering all the network address.
6.After finishing, select “Exit” and press SELECT button. The
Exit
ENGLISH
Network Board
OWNER’S MANUAL
19
