Network configuration

[4] Network configuration

When you connect a projector to a network, the network number of projector must be the same as the network you intend to connect. You should configure projector’s network first. Make sure that the projector is connected to the network correctly. There are 2 ways to configure the network, by using the projector’s menu [A], or by using the computer [B]. Refer to the chart below and use the method you prefer.

Procedure of Connecting the projector to the network

 

 

Configure the network with the

 

A

 

projector

p.16

 

 

 

 

Turn the projector on and display the network setting menu on the screen.

Configure the network through the projector's menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

Configure the network with computer

p.18

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Temporarily set up the computer's

 

 

Please see further

 

 

 

 

 

informatin on pages

 

 

 

network with the default network

 

 

18-23.

 

 

 

 

number of the PJ-Net Organizer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Example of projector's configuration

 

 

 

 

 

 

 

 

 

 

IP Address : 192.168.0.5

 

 

 

 

 

 

 

 

 

 

Subnet Mask : 255.255.255.0

 

 

 

 

Restart the Computer, if required

 

 

Default Gateway : (blank)

 

 

 

 

 

 

DNS : (blank)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Example of projector's configuration

IP Address : 192.200.1.201

Subnet Mask : 255.255.255.0

Default Gateway : 192.200.1.1

DNS : 0.0.0.0

Restart the PJ-Net Organizer

Please see further informatin on pages 16-17.

Using the web browser and login to the setting page of the PJ-Net Organizer by accessing the default IP address.

Change the network address you want to connect to the existing network through the setting menu on the browser.

Restart the PJ-Net Organizer

Please see further informatin on pages 25-30.

Default Network Address of the PJ-

NetOrganizer

IP Address : 192.168.0.2

Subnet Mask : 255.255.255.0

Default Gateway : 0.0.0.0

DNS : 0.0.0.0

Example of projector's configuration IP Address : 192.200.1.201 Subnet Mask : 255.255.255.0 Default Gateway : 192.200.1.1 DNS : 0.0.0.0

ENGLISH

Reset to the computer's original network configuration.

Completing the network configuration. Perform the basic setting and operation of the projector by using the web browser. Please see chapter "Basic Setting" on page 25 for further information.

PJ-Net Organizer

OWNER’S MANUAL

15