Controlling the Multi-Projectors
Load and apply the setting value
The control sets saved for each projector (p. 46) can be used while the multi-controlled projectors function is being used. Select a setting number from the item Load Setting No. with the popup menu button and then press the Set button. The control values stored with selected set number for each projector will be applied to the individual projector assigned to that set. The control values will not be applied to all of the projectors under multi-control.
Control multi-projectors at the same time
The valid controls are shown below. Please refer to chapter "Control the Projector" on page 33 for further control and description. When the control button or setting button is pressed, the registered projectors for the multi-control are controlled at the same time.
