Controlling the Multi-Projectors

Selection of another projector

When you register the projectors for the multi-control, the IP addresses of the registered projectors are listed on the "Change a Projector" menu on the lower left side of the page. If each projector has a name, the projector name is indicated instead of the IP address. To register the projector name, see chapter "Except/Add the projectors from/into the multi-control" on page 51.

1To switch the projector to control, click on the linked text of IP address or projector name.

2The login page for the selected projector is displayed with a new window and then enter the password for this projector and login.

You can control and set up this projector.

Projector selection menu

Click on the linked text to switch the projector.

54