Controlling the Projector

Control the projector

Click on the Control linked text on the main menu. The control menu will be displayed on the lower side of the page. When you click each control icon, the control page is displayed according to the control menu you selected.

✐Please see the owner's manual of the projector to have the further information of each con- trol item.

✐The control page displays valid control items depending on the selected input mode or signal, therefore, there may be different controls between the described items and actual control items on the page display.

✐When the projector is in standby, only the timer on the setting menu is effective; others are inactive.

Input

Select the input mode and source to the projector in this page. Select the input source with the radio button, and input source mode with the popup menu. Then set the selected input source and source mode by pressing

the Set button. The available selections are listed below.

You can save your note regarding to the input mode and source in the comment text area. Press the Save button to save.

Input

Input Signal

 

 

INPUT1

[ANALOG], [DIGITAL]

 

 

INPUT2

[VIDEO], [Y, Cb/Pb, Cr/Pr], [RGB]

 

 

INPUT3

[VIDEO], [S-VIDEO], [Y, Cb/Pb, Cr/Pr]

 

Select a source

 

 

 

 

mode with popup

 

 

 

 

 

 

 

menu.

 

 

 

 

 

Select a source with radio buttons.

36