E-mail Setting

E-mail Setting

This product has an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click on the E-Mail Setting linked text on the main

menu and follow the below steps.

1 SMTP Server*1

Type the address of SMTP server for E-mail and press the Set button.

2 Administrator Address

Type the E-mail address of administrator and press the Set button. This address is set to "Reply-To" address sent from the projector.

3 Registering and delet-ing E-mail addresses

Type the E-mail address to which an alert message is

sent and press the Add button. The registered addresses are listed on the below column as the "Mail To" address. To delete the registered addresses, press the Delete button next to the E-mail address you want to delete.

4 Condition selection for sending alert message

Check the condition items under which alert messages will be sent and press the Set button.

Please refer to chapter “Examples :Type and contents of alert messages” described on next page.

*1 The SMTP server is a server for sending E-Mail. Please contact your network administrator to have this SMTP server address.

✐To use the E-Mail function, it must be set the DNS address on the Network Setting page correctly.

✐You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your network environment. If the SMTP server is located in your LAN (Local Area network), the address set to SMTP server should be specified the in SMTP server located in your LAN. The server located outside of your LAN may not be available for security reason. For further information please contact your network administrator.

✐Up to 10 e-mail addresses can be registered.

PJ-Net Organizer

OWNER’S MANUAL

ENGLISH

31