Network configuration

[4] Network configuration

When you connect a projector to a network, the network number of projector must be the same as the network you intend to connect. You should configure projector’s network first. Make sure that the projector is connected to the network correctly. There are 2 ways to configure the network, by using the [A] projector’s menu, or by using the [B] computer . Refer to the chart below and use the method you prefer.

Procedure of Connecting the projector to the network

 

 

Configure the network with the

 

A

 

projector

p.16

 

 

 

 

Turn the projector on and display the network setting menu on the screen.

Configure the network through the projector's menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

Configure the network with computer

p.18

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Temporarily set up the computer's

 

 

Please see further

 

 

 

 

 

informatin on pages

 

 

 

network with the default network

 

 

18-23.

 

 

 

 

number of the Network Unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Example of projector's configuration

 

 

 

 

 

 

 

 

 

 

IP Address : 192.168.0.5

 

 

 

 

 

 

 

 

 

 

Subnet Mask : 255.255.255.0

 

 

 

 

Restart the Computer, if required

 

 

Default Gateway : (blank)

 

 

 

 

 

 

DNS : (blank)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Example of projector's configuration

IP Address : 192.168.1.201

Subnet Mask : 255.255.255.0

Default Gateway : 192.168.1.1

DNS : 0.0.0.0

Restart the Network Unit

Please see further informatin on pages 16-17.

Using the web browser and login to the setting page of the Network Unit by accessing the default IP address.

Change the network address you want to connect to the existing network through the setting menu on the browser.

Restart the Network Unit

Please see further informatin on pages 25-31.

Default Network Address of the Network

Board

IP Address : 192.168.0.2

Subnet Mask : 255.255.255.0

Default Gateway : 0.0.0.0

DNS : 0.0.0.0

Example of projector's configuration IP Address : 192.168.1.201 Subnet Mask : 255.255.255.0 Default Gateway : 192.168.1.1 DNS : 0.0.0.0

ENGLISH

Reset to the computer's original network configuration.

Completing the network configuration. Perform the basic setting and operation of the projector by using the web browser. Please see chapter "Basic Setting" on page 25 for further information.

Network Unit

OWNER’S MANUAL

15

Page 15
Image 15
Sanyo POA-PN10 owner manual Network configuration, Procedure of Connecting the projector to the network

POA-PN10 specifications

The Sanyo POA-PN10 is a premium replacement lamp designed for select Sanyo projectors, particularly the PLC-XF47, PLC-XF48, and PLC-XF70 models. This high-quality lamp is engineered specifically to maintain the performance of these projectors, ensuring that users can enjoy vibrant and clear visuals in various lighting conditions.

One of the primary features of the Sanyo POA-PN10 is its high brightness output, measured at approximately 4000 ANSI lumens. This impressive figure allows the projector to deliver bright images, making it suitable for both small and large venues, including classrooms, conference rooms, and auditoriums. Coupled with a contrast ratio of up to 2000:1, users can expect deep blacks and vivid colors that enhance the overall viewing experience.

The POA-PN10 lamp utilizes high-pressure mercury technology to produce its luminous output. This technology is known for its energy efficiency and extended lifespan, typically lasting between 2000 to 3000 hours, depending on usage and operating conditions. Users can extend the life of the lamp by utilizing eco-mode settings, which reduce power consumption and heat generation.

In addition to brightness and efficiency, the Sanyo POA-PN10 is designed for easy installation and replacement. With a user-friendly design, it allows users to quickly swap out the old lamp with minimal disruption, ensuring that presentations and meetings can continue smoothly without extended downtime.

Another noteworthy characteristic of the Sanyo POA-PN10 is its high-quality construction. It is designed to meet strict performance standards, minimizing the risk of failure during critical presentations. Additionally, the lamp is rigorously tested for compatibility with Sanyo projectors, assuring users of optimal performance and reliability.

In summary, the Sanyo POA-PN10 stands out as an essential component for enhancing the capabilities of Sanyo projectors. With its high brightness output, energy-efficient design, and ease of use, it caters to the needs of both professional environments and educational settings. Users can expect longevity and quality, making this lamp a worthwhile investment for organizations looking to achieve superior visual presentations.