Sanyo POA-PN10 Configure the network with the projector, Selection of network menu Network

Installation

A	Configure the network with the projector
	This example explains how to set the following configuration.
	IP Address	: 192.168.1.201
	Subnet Mask	: 255.255.255.0
	Default Gateway	: 192.168.1.1
	DNS	: 0.0.0.0

1 Selection of network menu [Network]

Turn on the projector and display the menu on the screen. Select the Network icon from the Setting sub menu using the pointers, and then press the SELECT button on the remote control or on the projector. Confirm that its mode is set On. If not, change mode to On using the pointer 7/8.

*The above on-screen display may differ from the actual display depending on the functions of the projector you use.

2 Configuration for IP Address/ Subnet mask/Default Gateway*/DNS*

Press the SELECT button again, the fol- lowing network setting menu appears on the screen. Enter the specified network address. The following is an example of a network configuration.

NETWORK SETTING
IP Address	192	168	1	201
Sub net	255	255	255	0
Gateway	192	168	1	1
DNS	0	0	0	0
			SET	CANCEL

*In the network environments not using a Gateway or Router, the Default Gateway address should be set to [0.0.0.0]. If you do not use the functions E-mail or DNS server, it is also set [0.0.0.0] for the DNS address.

16