Sanyo POA-PN10 owner manual Use of Serial Port, Serial port setting, Serial Control

Use of Serial Port

This product provides with a serial control port (RS-232C) to control the external equipment which has an RS-232C port. This function allows exter- nal equipment to be controlled by the computer through the network and the projector can be controlled by the external serial controller. Before con-

necting the external equipment, perform the setting “Serial port setting” described below.

Serial port setting

Set up the extra serial port of this product. Click on the Extra Serial Port Setting linked text on the main menu and the following setting page will be displayed. To communicate with external equipment correctly, software communication conditions must be set to the same values as that the connected equipment is using. After fix- ing the setting, press the Set button*1. Enter your note into the comment column and press the Save button.

58

Setting Items	Description
Baud Rate	Communication speed for serial port, select with pull down menu button.
Parity	Parity check, the ways for errors detecting of transferred data.
Stop	Stop bit, indicates the end of communication.
Flow Control	Ways for communication flow.
Data	Indicates the length of data.
Serial Control	Selects equipment to control
	External........Used to select when the external equipment connected to the
	serial port is controlled by the computer through the LAN port.
	Projector ......Used to select when the projector is controlled by the serial con-
	troller connected to the serial port.
Port	Indicates the port number of TCP/IP. The default number is 23. Use the
	same port number specified by application. There are some reserved port
	number*2. If one of those port numbers is used, the alert dialog window will
	appear and let you know that it is an invalid port number.