Controlling the Projector
Control the projector
Click on the Control linked text on the main menu. The control menu will be displayed on the lower side of the page. When you click each control icon, the control page is displayed according to the control menu you selected.
✐Please see the owner's manual of the projector to have the further information of each con- trol item.
✐The control page displays valid control items depending on the selected input mode, signal or functions of the projector you use, therefore, there may be different controls between the described items and actual control items on the page display.
✐When the projector is in standby, only the timer on the setting menu is effective; others are inactive.
Input
Select the input mode and source to the projector in this page. Select the input source with the radio button, and input source mode with the pull down menu. Then set the selected input source and source mode by
pressing the Set button. The available selections are listed below.
You can save your note regarding to the input mode and source in the comment text area. Press the Save button to save.
Input | Input Signal |
Computer 1 | RGB, RGB(Scrat) |
Computer 2 | RGB |
Video | AUTO, VIDEO, |
|
|
Select a source mode with pull down
Note:
This network unit is connected to the DVI terminal on the projec- tor, therefore, the digi- tal input does not be used when this unit is mounted. The RGB analog input of the Computer 2 can be used through the VGA terminal on the net- work unit.
38
menu. |
Select a source with |
radio buttons. |
