Sanyo POA-PN10 owner manual Exclude/Add the projectors from/into the multi-control, English

Multi-control

[Note]

*1 If the JavaScript setting of the web browser is set “JavaScript Disable”, The registered pro- jector name will not be listed on the Change a Projector” sub menu, Please change the JavaScript setting. See chapter “Web browser setting/Active Script (JavaScript enable)” on page 68 for further instructions.

* If you do not use the projector name, a word “None” will be displayed in the Name column.

Exclude/Add the projectors from/into the multi-control

To add or exclude projectors from multi-control, check or uncheck the "Control" check boxes for your desired projectors and then press the Set button. The gray back- ground color shows that the projector is excluded from multi-control.

check if adding into the multi- control

Press the Set but- ton to adding into the multi-control.

Add all of listed projectors into multi-control

To add all of listed projectors into the multi-control, press the Add All button. The sta- tus of the registered projectors are indicated on the column "Status". For further description of "Status" , see page 55.

Press the Add All but- ton to add all of projectors.

Press the Delete button to delete from the multi- control list.

ENGLISH

Delete from the multi-control list

To delete the registered projector from the multi-control list, press the Delete button.

✐If you not register the projector name, the word “None” is displayed on the projector name column.

✐You can register the projectors up to 100 sets for the multi-control.

Network Unit

OWNER’S MANUAL

53