Sanyo POA-PN10 owner manual Controlling the Multi-Projectors Multi-Control

Controlling the Multi-Projectors

Multi-Control

This function enables control of multiple projectors equipped with the Network Units that are connected to the network at the same time. Click on

the Multi Control linked text on the main menu to display the control page.

Note:

To control the multiple projectors, each projector must have the same password.

Register IP address and projector name

Enter the IP address of the projector onto the text box. Name the projector name* if required and then press the Set button to register.

After the registration, the IP address and projector name are listed on the page. At the same time, your registered projector name is listed on the sub-menu "Change a Projector"*1. For further information, see chapter "Selection of another projector" on page 56.

*Normally, the projector in the network is recognized with the IP address. This product allows you to name the projector instead of the IP address. By registering the projector’s nickname like “MeetingRoom101”, it can be managed and recognized easily. If you use the DNS server, register the host name registered to the DNS server as projector name. For further informa- tion please consult your network administrator.

If you do not register the projector name, the IP address is listed on the sub menu “Change a Projector”.

52