Call Alarm Alerts

There are several ways your PCS Phone alerts you of a scheduled call alarm:

By playing the alert tone (depending on the Ringer Type and Ringer Volume setting).

By blinking the LED.

By displaying the call alarm notification on the LCD.

By lighting the LCD backlight (depending on the backlight setting).

Call Alarm Menu

When your phone is turned on and you have scheduled a call alarm, your phone alerts you and displays the name or phone number you wish to call.

To respond to a call alarm:

1.Press or View (left softkey) to silence the alarm and see the unchecked event list.

2.Highlight the unchecked event and press to see the call alarm details. Press Done (left softkey) to erase the unchecked event.

– or –

Press Options (right softkey) for the following options (to select an option, highlight it and press ).

Call to dial the scheduled phone number.

Call:Speaker On to dial the scheduled phone number in speakerphone mode.

Snooze to repeat the alarm in ten minutes.

Save Phone# to save the scheduled phone number in your Contacts list. Go to Phone Book appears when the number is already in your Contacts list. (See “Saving a Phone Number” on page 25.)

Note: If you press Exit (left softkey) during step 2 above, you are prompted to erase the unchecked event. Select Yes to erase or No to cancel.

Section 2H: Personal Organizer

99

Page 111
Image 111
Sanyo RL 4920 manual Call Alarm Alerts, Call Alarm Menu, To respond to a call alarm