Answering Calls

To answer an incoming call:

1.Make sure your phone is on. If your phone is off, incoming calls go to voicemail.

2.Press or Speaker (left softkey) to answer an incoming call. (Depending on your phone’s settings, you may also answer

incoming calls by pressing any number key. See “Setting Any Key Answer” on page 38 for more information.)

Your phone notifies you of incoming calls in the following ways:

The phone rings or vibrates.

The LED flashes.

The backlight illuminates.

The screen displays an incoming call message.

If available, the phone number of the caller is displayed.

If the phone number is in your Contacts list, the contact’s name is displayed.

The following options are also displayed by pressing Options (right softkey).

To select an option, highlight it and press .

Answer to answer the call.

Answer:Speaker to answer the call in speakerphone mode.

Don’t Answer to hang up the incoming call and return to Web while you are in the Web operation. (This feature appears when Web access is dormant.)

Screen Call to answer the call by using pre-recorded announcement. (This feature appears when you are in service area or digital roaming area.) See page 87 for setting up.

Quiet Ringer to mute the ringer. (This feature appears when the ringer is set.)

Note: If your phone is off, incoming calls go to voicemail.

Ending a Call

To disconnect a call when you are finished:

Press .

Tip: Time/Date is displayed when you press while the phone is in use.

10

11

Page 10
Image 10
Sanyo SCP-4920 manual Answering Calls, Ending a Call