Making a 10-4 Call Group Call | Sanyo SCP-4920 specification

Making a 10-4 Call (Group Call)

You can make a 10-4 call to all members in a Group entry, which you have in your 10-4 List. You can communicate with up to five members at a time.

1.Press 10-4(right softkey) or press to access the 10-4 List.

2.Press Go to (left softkey), highlight the list from which you want to make a Group call (Company Groups or Personal Groups), and press .

3.Highlight the group you want to call, and press and hold to place the call and take the floor. (You will see

10-4 calling... and Connecting... followed by “You have floor.”

Continue with the 10-4 call as described previously.)

To display a group member’s details, press , highlight your desired group member, then press View (left softkey) during step 3 above. Press to make a 10-4 call to the member.

If one of the group members takes the floor, you will see the member’s name and 10-4 number on the display. The phone beeps if you press the 10-4 button when another contact has the floor.

4.When the call is finished, press .

Tip: You can also make a Group Call after checking the group member.

Press to display group members, highlight <Call Group> and press and hold during step 3 above.

Making a 10-4 Call by Entering a Number

1.From standby mode, enter the 10-4 number you want to dial.

2.Press to place the 10-4 call. Continue holding to take the floor and speak.

The contact’s name appears if there is a matched number in your 10-4 List.

3.Continue with the 10-4 call, pressing and holding to speak and releasing it to allow others to reply.

4.When the call is finished, press .

– or –

1.Press 10-4(right softkey) or press to access the 10-4 List.

2.Press Go to (left softkey), highlight Enter 10-4#and press .

3.Enter the 10-4 number you want to dial.

4.Follow steps 2-4 above.

Missed Call Notification for 10-4 Calls

When an incoming 10-4 Call is not answered, the Missed Call Notification is displayed on your screen.

To call the last Missed 10-4 Call:

Simply press and hold while the Missed Call Notification is displayed. (Continue with the 10-4 call as described previously.)

To display the Missed 10-4 Call Log:

Press View (right softkey). To call the entry, highlight the entry you want to call, and press and hold . (Continue with the 10-4 call as described previously.)