Sending a Message, Add Recipient, and press

Sending a Message

1.Press to access the main menu.

2.Highlight Messaging and press .

3.Highlight Send Text and press .

4.Highlight From Phone Book, Mobile Phone#, or Email Address

and press to enter recipients.

From Phone Book to select a recipient from your Contacts list.

Highlight an entry and press to select. Or select

<Add Entry> to enter a new entry. Press Done (left softkey) when you are finished selecting/entering recipients.

Mobile Phone# to enter a mobile phone number directly.

Email Address to enter an email address directly.

Tip: If you have unsent messages, you are prompted to send the messages during step 4 above.

5.To add a recipient, press Options (right softkey), highlight

Add Recipient, and press .

Edit to edit the selected entry.

Erase to erase the selected entry.

Erase All to erase all entries you have selected/entered.

Add Recipient to add recipients.

6.Press Next (left softkey) when you are finished selecting/entering recipients (you may include up to 10 recipients).

7.To enter a message, select the box under Message and press .

8.Use your keypad to enter a text message (or press the right softkey to select from Preset Messages or Recent Messages) and press .

9.To set the message priority, select the box under Priority and press .

10.Highlight Ordinary or Urgent and press .

11.Press Send (left softkey) to send the message.

To change the recipients or to save the message as a draft, press Options (right softkey) and select Chg Recipients or Save to Drafts

during steps 7-10 on the previous page.

Chg Recipients to change Recipients.

Send Callback# to select from None, My Phone#, or Other to notify your recipients of your callback number. (See “Setting Your Callback Number” on page 40.)

Save to Drafts to save the message to a Drafts folder. (See below to edit and send the draft message.)

Note: If there is a failure when sending a message in no-service area, you are prompted to select to send the message automatically. Press Yes (left softkey), and the message goes to the Outbox folder with . If you press No (right softkey), the message goes to the folder with . (See next page to send the message.)