Sanyo SCP-6400 manual Using Different Dialing Methods, My PCS Phone Number, Prepend Dialing

Using Different Dialing Methods

Prepend Dialing

Prepend dialing allows you to alter a phone number in your Phone Book by adding additional numbers. For example, if your Internal Phone Book entry was entered without an area code and you are out of town, you can prepend that entry with the appropriate area code.

1.Highlight the phone number stored in Phone Book entry using one of the previously described methods.

2.Press Options (right softkey) to display the menu options.

3.Highlight Prepend and press .

4.Enter the digits you wish to prepend.

5.Press . or

Press to display the menu options, then highlight Call and press

.

Using Speed Dial

With this feature you can dial Internal Phone Book entries with one key press for locations 2-9. Save your memory locations 2-9 for speed dialing or your most commonly used phone numbers. Speed dial numbers must be stored in your Phone Book to use this feature.

To store a speed dial number:

1.Press of the Navigation key.

2.Highlight the Internal Phone Book entry which you want to set a speed dial number.

3.Press .

4.Select the box under the phone number you want to set a speed dial.

5.Press Options (right softkey) to display the menu options.

6.Highlight Set Speed Dial and press .

7.To select a corresponding speed dial number from 2-9, highlight an

unassigned number and press .

OR

Section 2: Understanding Your Phone

1.From the Standby mode, press to display the main menu.

2.Highlight Phone Book and press .

3.Highlight Speed Dial #s and press .

4.To select a corresponding speed dial number from 2-9, highlight an

unassigned number and press .

5.Highlight the entry from the list and press .

6.Select the phone number you want to set a speed dial, and press . To use speed dial:

1.From the Standby mode, press and hold the appropriate key that corresponds to the memory location for approximately two seconds.

OR

1.From the Standby mode, press the appropriate key, and then press .

The display confirms that the number has been dialed when it shows Connecting.

My PCS Phone Number

To display your phone number:

1.From the Standby mode, press to display the main menu.

2.Highlight Phone Book, and press .

3.Highlight My Phone#, and press .

Section 2: Understanding Your Phone

88 2G: Using the Internal Phone Book 2G: Using the Internal Phone Book 89