Sanyo SRT-4040, SRT-4040DC SERIES RECORDING, Series Recording Setup, Operation, Loop recording, VCR, Item, Stop, Stop, NOTES:, and on, VCR No.1, VCR No.2, terminal, TAPE END, SERIES IN

(GENERAL SET) menu.

œ Set “TAPE”the item in the (GENERAL SET) menu according to the duration of the tape used.

NB4QR/NA (SRT-4040 GB) Tue. Sept., 10/2002

SERIES RECORDING

Using 2 VCRs or more, the series recording function lets you switch recording from one unit to the next (only with VCRs of the same model as this one).

Series Recording Setup

Operation

The output signal at theTAPE END OUT terminal will be present either at the point when the counter reading is 8:00:00 or when VCR No. 1 reaches the end of the tape, whichever is first.

œ Connect 2 VCRs or more as illustratedWhen this signal is receivedbelowby.VCR No. 2, it will start recording.

When the tape end is reached, operation is then carried

1 PressREC/PLAYthe SPEED l button to setout accordingthe to the“TAPE END MODE” setting in the recording speed mode.

2 Set the following items as indicated.

NOTES:

			œ When using tapes that are based on th
Item	VCR No.1	VCR No.2	œ When using tapes that are based on th
Item	VCR No.1	VCR No.2	standard, a single tape can be used to
		and on	standard, a single tape can be used to
		and on	or more based on the counter setting
Cassette tape	Loaded	Loaded	or more based on the counter setting
Cassette tape	Loaded	Loaded	when “TAPE”the in (GENERAL SET) menu is set to

Operation mode	Stop	Stop
Operation mode	Stop	Stop	“T-120”).
			“T-120”).
“TAPE END MODE”(in	REW,	REW,	œ If“SERIES REC” is set to “N” in the (ALARM/SERIES
(GENERAL SET) menu)	STOP or	STOP or	œ If“SERIES REC” is set to “N” in the (ALARM/SERIES
(GENERAL SET) menu)	STOP or	STOP or	REC SET) menu, series recording will not be possible.
	EJECT	EJECT	REC SET) menu, series recording will not be possible.
	EJECT	EJECT	œ The counter must start from the begin

“SERIES REC” (in
“SERIES REC” (in			œ Even“OFF”ifis displayed, series recording will be
(ALARM/SERIES REC	Y (YES)	Y (YES)	œ Even“OFF”ifis displayed, series recording will be
SET) menu)			conducted if there is an input at the SERIES IN
			terminal.
Timer recording	OFF (not	OFF (not	terminal.
Timer recording	OFF (not	OFF (not
	set)	set)
			Loop recording
Security lock	Canceled	Set	Loop recording
3 PressRECthebutton on VCR No.1.			œ Connect the outputTAPE END fromOUT terminalthe
3 PressRECthebutton on VCR No.1.			of the last VCR to theSERIES IN terminal of the first
ø Recording will start in series recording mode.			of the last VCR to theSERIES IN terminal of the first
ø Recording will start in series recording mode.			VCR.

4 Set the security lock on œVCRThe No.1.

“TAPE END MODE” in (GENERAL SET) menu should be set to “REW” for all units without fail.

œIn loop recording mode, the tape will over. If you need to keep the recorde please eject the tape after recording insert a new tape.

Connection

Video camera	Monitor TV	Series recording
Video camera	Monitor TV	Series recording
		Loop recording

To VIDEO OUT jack

To VIDEO IN jack

VCR No. 1		VCR No. 2
SERIES IN COM TAPE END OUT	VIDEO IN VIDEO OUT	SERIES IN COM TAPE END OUT	VIDEO IN VIDEO OUT

To SERIES IN terminal

To COM terminal

English